| da | 85 | mm | |
| db | 100.013 | mm | |
| dc | 80.963 | mm | |
| Da | 150 | mm | |
| Ca | 45.796 | mm | |
| A1 | 88.9 | mm | |
| A2 | 127 | mm | |
| S | 4.763 | mm | |
| ba | 35.719 | mm | |
| H | 182.166 | mm | |
| H1 | 95.25 | mm | |
| H2 | 31.75 | mm | |
| J | min. | 250.825 | mm |
| J | max. | 279.4 | mm |
| L | 330.2 | mm | |
| N1 | 22.225 | mm | |
| Threaded holes | |||
| R1 | 53.975 | mm | |
| R2 | 22.225 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 34.925 | mm | |
| Housing | SAF 217 | |||
| Bearing | 22217 E | |||
| ||||
| Lock nut | AN 17 | |||
| Lock washer | W 17 | |||
| Stabilizing ring | SR-17-14 | |||
| Labyrinth ring (db shaft position) | LOR 89 | |||
| Labyrinth ring (dc shaft position) | LOR 63 | |||
| End plug (suffix Y) | EPR 9 | |||
| Bearing limiting speed | 5600 | r/min |
| P60° | 84.5 | kN | |
| P90° | 50.7 | kN | |
| P120° | 31.6 | kN | |
| P150° | 28.5 | kN | |
| P180° | 34.7 | kN | |
| Pa | 22.2 | kN |
| Mass pillow block | 15.5 | kg |
| Cap bolt | 2 x 5/8-11 UNC | |||
| Cap bolt recommended tightening torque | 149.1 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Appropriate attachment bolt size | G | 0.75 | in | |
| Initial grease fill | 218.29 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
