da | 75 | mm | |
db | 87.313 | mm | |
dc | 71.438 | mm | |
Da | 130 | mm | |
Ca | 37.008 | mm | |
A1 | 79.375 | mm | |
A2 | 196.85 | mm | |
S | 3.175 | mm | |
ba | 32.544 | mm | |
H | 157.559 | mm | |
H1 | 82.55 | mm | |
H2 | 28.575 | mm | |
J | min. | 219.075 | mm |
J | max. | 244.475 | mm |
J1 | 47.625 | mm | |
L | 285.75 | mm | |
N1 | 15.875 | mm | |
Threaded holes | |||
R1 | 46.038 | mm | |
R2 | 21.431 | mm | |
RG | 1/4 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 28.575 | mm |
Housing | FSAF 215 | |||
Bearing | 22215 E | |||
| ||||
Lock nut | AN 15 | |||
Lock washer | W 15 | |||
Stabilizing ring | SR-15-0 | |||
Taconite seal (db shaft position) | TER 79 | |||
Taconite seal (dc shaft position) | TER 46 |
End plug (suffix Y) | EPR 8 |
Max. speed for Taconite seal | 900 | r/min |
P60° | 54.7 | kN | |
P90° | 32.5 | kN | |
P120° | 20 | kN | |
P150° | 18.2 | kN | |
P180° | 22.2 | kN | |
Pa | 14.2 | kN |
Mass pillow block | 12.2 | kg |
Cap bolt | 2 x 1/2-13 UNC | |||
Cap bolt recommended tightening torque | 81.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.5 | in | |
Initial grease fill | 68.04 | g |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ