| da | 200 | mm | |
| db | 222.25 | mm | |
| dc | 193.675 | mm | |
| Da | 359.999 | mm | |
| Ca | 107.798 | mm | |
| A1 | 203.2 | mm | |
| A2 | 358.775 | mm | |
| S | 4.763 | mm | |
| ba | 83.344 | mm | |
| H | 419.1 | mm | |
| H1 | 209.55 | mm | |
| H2 | 85.725 | mm | |
| L | 749.3 | mm | |
| Threaded holes | |||
| R1 | 122.237 | mm | |
| R2 | 42.862 | mm | |
| RG | 1 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 62.706 | mm | |
| Housing | SSAFS 240 | |||
| Bearing | 22240 CC/W33 | |||
| ||||
| Lock nut | AN 40 | |||
| Lock washer | W 40 | |||
| Stabilizing ring | SR-40-34 | |||
| Taconite seal (db shaft position) | TER 175 | |||
| Taconite seal (dc shaft position) | TER 164 | |||
| End plug (suffix Y) | EPR 22 | |||
| Max. speed for Taconite seal | 350 | r/min |
| P60° | 557 | kN | |
| P90° | 334 | kN | |
| P120° | 207 | kN | |
| P150° | 185 | kN | |
| P180° | 222 | kN | |
| Pa | 145 | kN |
| Mass pillow block | 254 | kg |
| Cap bolt | 1 1/4-7 UNC | |||
| Cap bolt recommended tightening torque | 2467.6 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Eye bolt | 2 x 3/8-16 UNC | |||
| Initial grease fill | 2154.6 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
