| da | 170 | mm | |
| db | 158.75 | mm | |
| dc | 134.938 | mm | |
| Da | 309.999 | mm | |
| Ca | 95.809 | mm | |
| A1 | 171.45 | mm | |
| A2 | 247.65 | mm | |
| S | 4.763 | mm | |
| ba | 74.612 | mm | |
| H | 360.363 | mm | |
| H1 | 179.4 | mm | |
| H2 | 69.85 | mm | |
| L | 628.65 | mm | |
| Threaded holes | |||
| R1 | 115.888 | mm | |
| R2 | 37.306 | mm | |
| RG | 3/4 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 54.769 | mm | |
| Housing | SSAFS 234 | |||
| Bearing | 22234 CC/W33 | |||
| ||||
| Lock nut | AN 34 | |||
| Lock washer | W 34 | |||
| Stabilizing ring | SR-34-0 | |||
| Labyrinth ring (db shaft position) | LOR 161 | |||
| Labyrinth ring (dc shaft position) | LOR 148 | |||
| End plug (suffix Y) | EPR 19 | |||
| Bearing limiting speed | 2600 | r/min |
| P60° | 345 | kN | |
| P90° | 207 | kN | |
| P120° | 127 | kN | |
| P150° | 113 | kN | |
| P180° | 113 | kN | |
| Pa | 73.4 | kN |
| Mass pillow block | 160 | kg |
| Cap bolt | 1-8 UNC | |||
| Cap bolt recommended tightening torque | 1220 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Eye bolt | 2 x 3/8-16 UNC | |||
| Initial grease fill | 878.85 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
