da | 110 | mm | |
db | 123.825 | mm | |
dc | 106.362 | mm | |
Da | 200 | mm | |
Ca | 62.89 | mm | |
A1 | 120.65 | mm | |
A2 | 231.775 | mm | |
S | 4.763 | mm | |
ba | 50.006 | mm | |
H | 244.475 | mm | |
H1 | 125.425 | mm | |
H2 | 52.388 | mm | |
J | min. | 320.675 | mm |
J | max. | 368.3 | mm |
J1 | 69.85 | mm | |
L | 419.1 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 67.866 | mm | |
R2 | 31.75 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 45.244 | mm |
Housing | SAFS 222 | |||
Bearing | 22222 E | |||
| ||||
Lock nut | AN 22 | |||
Lock washer | W 22 | |||
Stabilizing ring | SR-22-19 | |||
Taconite seal (db shaft position) | TER 121 | |||
Taconite seal (dc shaft position) | TER 113 |
End plug (suffix Y) | EPR 14 |
Max. speed for Taconite seal | 625 | r/min |
P60° | 178 | kN | |
P90° | 107 | kN | |
P120° | 66.7 | kN | |
P150° | 59.6 | kN | |
P180° | 72.5 | kN | |
Pa | 46.7 | kN |
Mass pillow block | 50.3 | kg |
Cap bolt | 5/8-11 UNC | |||
Cap bolt recommended tightening torque | 298.3 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Eye bolt | 2 x 3/8-16 UNC | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 481.95 | g |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ