| da | 100 | mm | |
| db | 114.3 | mm | |
| dc | 96.838 | mm | |
| Da | 180 | mm | |
| Ca | 55.804 | mm | |
| A1 | 111.125 | mm | |
| A2 | 155.575 | mm | |
| S | 4.763 | mm | |
| ba | 44.45 | mm | |
| H | 217.488 | mm | |
| H1 | 114.3 | mm | |
| H2 | 44.45 | mm | |
| J | min. | 295.275 | mm |
| J | max. | 333.375 | mm |
| J1 | 60.325 | mm | |
| L | 387.35 | mm | |
| N1 | 22.225 | mm | |
| Threaded holes | |||
| R1 | 58.737 | mm | |
| R2 | 30.163 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 42.069 | mm | |
| Housing | FSAF 220 | |||
| Bearing | 22220 E | |||
| ||||
| Lock nut | AN 20 | |||
| Lock washer | W 20 | |||
| Stabilizing ring | SR-20-17 | |||
| Labyrinth ring (db shaft position) | LOR 118 | |||
| Labyrinth ring (dc shaft position) | LOR 106 | |||
| End plug (suffix Y) | EPR 15 | |||
| Bearing limiting speed | 4500 | r/min |
| P60° | 119 | kN | |
| P90° | 71.2 | kN | |
| P120° | 44.5 | kN | |
| P150° | 40 | kN | |
| P180° | 48.9 | kN | |
| Pa | 31.6 | kN |
| Mass pillow block | 27.5 | kg |
| Cap bolt | 2 x 3/4-10 UNC | |||
| Cap bolt recommended tightening torque | 203.4 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Appropriate attachment bolt size | G | 0.75 | in | |
| Initial grease fill | 181.44 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
