da | 100 | mm | |
db | 114.3 | mm | |
dc | 96.838 | mm | |
Da | 180 | mm | |
Ca | 55.804 | mm | |
A1 | 111.125 | mm | |
A2 | 219.075 | mm | |
ba | 38.894 | mm | |
H | 217.488 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
L | 387.35 | mm | |
N1 | 25.4 | mm | |
Threaded holes | |||
R1 | 58.737 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 42.069 | mm |
Housing | SAF 220 | |||
Bearing | 1220 | |||
| ||||
Lock nut | AN 20 | |||
Lock washer | W 20 | |||
Stabilizing ring | 2 x SR-1520 | |||
Taconite seal (db shaft position) | TER 118 | |||
Taconite seal (dc shaft position) | TER 106 |
End plug (suffix Y) | EPR 15 |
Max. speed for Taconite seal | 675 | r/min |
P60° | 136 | kN | |
P90° | 81.4 | kN | |
P120° | 50.7 | kN | |
P150° | 46.3 | kN | |
P180° | 55.6 | kN | |
Pa | 36 | kN |
Mass pillow block | 26.8 | kg |
Cap bolt | 2 x 3/4-10 UNC | |||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.875 | in | |
Initial grease fill | 365.71 | g |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ