| da | 220 | mm | |
| db | 242.887 | mm | |
| dc | 211.137 | mm | |
| Da | 399.999 | mm | |
| Ca | 117.805 | mm | |
| A1 | 222.25 | mm | |
| A2 | 368.3 | mm | |
| S | 4.763 | mm | |
| ba | 90.487 | mm | |
| H | 473.075 | mm | |
| H1 | 241.3 | mm | |
| H2 | 95.25 | mm | |
| L | 831.85 | mm | |
| Threaded holes | |||
| R1 | 130.175 | mm | |
| R2 | 46.831 | mm | |
| RG | 1 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 79.375 | mm | |
| Housing | SSAFS 244 | |||
| Bearing | 22244 CC/W33 | |||
| ||||
| Lock nut | N 44 | |||
| Lock washer | W 44 | |||
| Stabilizing ring | SR-44-38 | |||
| Taconite seal (db shaft position) | TER 179 | |||
| Taconite seal (dc shaft position) | TER 170 | |||
| End plug (suffix Y) | EPR 24 | |||
| Max. speed for Taconite seal | 315 | r/min |
| P60° | 691 | kN | |
| P90° | 414 | kN | |
| P120° | 260 | kN | |
| P150° | 236 | kN | |
| P180° | 285 | kN | |
| Pa | 185 | kN |
| Mass pillow block | 352 | kg |
| Cap bolt | 1 1/2-6 UNC | |||
| Cap bolt recommended tightening torque | 4284.4 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Eye bolt | 2 x 3/8-16 UNC | |||
| Initial grease fill | 2749.95 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
