da | 120 | mm | |
db | 134.938 | mm | |
dc | 115.888 | mm | |
Da | 259.999 | mm | |
Ca | 95.809 | mm | |
A1 | 158.75 | mm | |
A2 | 215.9 | mm | |
S | 4.763 | mm | |
ba | 67.469 | mm | |
H | 320.675 | mm | |
H1 | 160.325 | mm | |
H2 | 63.5 | mm | |
J | min. | 431.8 | mm |
J | max. | 463.55 | mm |
J1 | 95.25 | mm | |
L | 539.75 | mm | |
N1 | 28.575 | mm | |
Threaded holes | |||
R1 | 82.55 | mm | |
R2 | 39.688 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 60.325 | mm |
Housing | SAF 324 | |||
Bearing | 22324 CC/W33 | |||
| ||||
Lock nut | AN 24 | |||
Lock washer | W 24 | |||
Stabilizing ring | SR-0-24 | |||
Labyrinth ring (db shaft position) | LOR 127 | |||
Labyrinth ring (dc shaft position) | LOR 119 |
End plug (suffix Y) | EPR 15 |
Bearing limiting speed | 2600 | r/min |
P60° | 230 | kN | |
P90° | 138 | kN | |
P120° | 87.2 | kN | |
P150° | 80.1 | kN | |
P180° | 96.1 | kN | |
Pa | 62.3 | kN |
Mass pillow block | 91.3 | kg |
Cap bolt | 4 x 3/4-10 UNC | |||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt | 2 x 3/8-16 UNC | |||
Appropriate attachment bolt size | G | 1 | in | |
Initial grease fill | 623.7 | g |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ