da | 130 | mm | |
db | 149.225 | mm | |
dc | 125.412 | mm | |
Da | 230 | mm | |
Ca | 73.812 | mm | |
A1 | 130.175 | mm | |
A2 | 203.2 | mm | |
S | 4.763 | mm | |
ba | 57.944 | mm | |
H | 292.1 | mm | |
H1 | 152.4 | mm | |
H2 | 60.325 | mm | |
J | min. | 371.475 | mm |
J | max. | 406.4 | mm |
J1 | 82.55 | mm | |
L | 466.725 | mm | |
N1 | 23.813 | mm | |
Threaded holes | |||
R1 | 79.375 | mm | |
R2 | 36.513 | mm | |
RG | 1/2 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 59.531 | mm |
Housing | SAFS 226 | |||
Bearing | 22226 E | |||
| ||||
Lock nut | AN 26 | |||
Lock washer | W 26 | |||
Stabilizing ring | SR-26-0 | |||
Labyrinth ring (db shaft position) | LOR 136 | |||
Labyrinth ring (dc shaft position) | LOR 122 |
End plug (suffix Y) | EPR 27 |
Bearing limiting speed | 3600 | r/min |
P60° | 308 | kN | |
P90° | 185 | kN | |
P120° | 125 | kN | |
P150° | 118 | kN | |
P180° | 151 | kN | |
Pa | 98.3 | kN |
Mass pillow block | 79.4 | kg |
Cap bolt | 3/4-10 UNC | |||
Cap bolt recommended tightening torque | 515.2 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Eye bolt | 2 x 3/8-16 UNC | |||
Appropriate attachment bolt size | G | 0.875 | in | |
Initial grease fill | 765.45 | g |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ