| da | 110 | mm | |
| db | 123.825 | mm | |
| dc | 106.362 | mm | |
| Da | 200 | mm | |
| Ca | 62.789 | mm | |
| A1 | 120.65 | mm | |
| A2 | 165.1 | mm | |
| S | 4.763 | mm | |
| ba | 50.006 | mm | |
| H | 239.316 | mm | |
| H1 | 125.425 | mm | |
| H2 | 50.8 | mm | |
| J | min. | 320.675 | mm |
| J | max. | 368.3 | mm |
| J1 | 69.85 | mm | |
| L | 419.1 | mm | |
| N1 | 22.225 | mm | |
| Threaded holes | |||
| R1 | 67.866 | mm | |
| R2 | 31.75 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 45.244 | mm | |
| Housing | SAF 222 | |||
| Bearing | 22222 E | |||
| ||||
| Lock nut | AN 22 | |||
| Lock washer | W 22 | |||
| Stabilizing ring | SR-22-19 | |||
| Labyrinth ring (db shaft position) | LOR 121 | |||
| Labyrinth ring (dc shaft position) | LOR 113 | |||
| End plug (suffix Y) | EPR 14 | |||
| Bearing limiting speed | 4000 | r/min |
| P60° | 149 | kN | |
| P90° | 89 | kN | |
| P120° | 55.6 | kN | |
| P150° | 50.7 | kN | |
| P180° | 60.9 | kN | |
| Pa | 39.6 | kN |
| Mass pillow block | 30.7 | kg |
| Cap bolt | 2 x 3/4-10 UNC | |||
| Cap bolt recommended tightening torque | 203.4 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Appropriate attachment bolt size | G | 0.75 | in | |
| Initial grease fill | 481.95 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
