| da | 120 | mm | |
| db | 134.938 | mm | |
| dc | 115.888 | mm | |
| Da | 215.001 | mm | |
| Ca | 67.793 | mm | |
| A1 | 120.65 | mm | |
| A2 | 250.825 | mm | |
| S | 4.763 | mm | |
| ba | 53.181 | mm | |
| H | 257.175 | mm | |
| H1 | 133.35 | mm | |
| H2 | 53.975 | mm | |
| L | 419.1 | mm | |
| Threaded holes | |||
| R1 | 79.375 | mm | |
| R2 | 30.163 | mm | |
| RG | 1/2 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 46.831 | mm | |
| Housing | SAFS 224 | |||
| Bearing | 22224 E | |||
| ||||
| Lock nut | AN 24 | |||
| Lock washer | W 24 | |||
| Stabilizing ring | SR-24-20 | |||
| Taconite seal (db shaft position) | TER 127 | |||
| Taconite seal (dc shaft position) | TER 119 | |||
| End plug (suffix Y) | EPR 15 | |||
| Max. speed for Taconite seal | 575 | r/min |
| P60° | 249 | kN | |
| P90° | 149 | kN | |
| P120° | 94.3 | kN | |
| P150° | 87.2 | kN | |
| P180° | 107 | kN | |
| Pa | 69.4 | kN |
| Mass pillow block | 61.2 | kg |
| Cap bolt | 5/8-11 UNC | |||
| Cap bolt recommended tightening torque | 298.3 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Eye bolt | 3/8-16 UNC | |||
| Initial grease fill | 765.45 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
