da | 40 | mm | |
db | 49.2 | mm | |
dc | 36.5 | mm | |
Da | 90 | mm | |
Ca | 42.799 | mm | |
A1 | 60.325 | mm | |
A2 | 172.244 | mm | |
S | 4.763 | mm | |
ba | 29.369 | mm | |
H | 125.412 | mm | |
H1 | 63.5 | mm | |
H2 | 25.4 | mm | |
J | min. | 165.1 | mm |
J | max. | 177.8 | mm |
L | 209.55 | mm | |
N1 | 15.875 | mm | |
Threaded holes | |||
R1 | 31.75 | mm | |
R2 | 15.875 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 30.163 | mm |
Housing | SAF 308 | |||
Bearing | 22308 E | |||
| ||||
Lock nut | N 08 | |||
Lock washer | W 08 | |||
Stabilizing ring | SR-10-8 | |||
Taconite seal (db shaft position) | TER 24 | |||
Taconite seal (dc shaft position) | TER 17 |
End plug (suffix Y) | EPR 3 |
Max. speed for Taconite seal | 1575 | r/min |
P60° | 32.5 | kN | |
P90° | 19.6 | kN | |
P120° | 12.5 | kN | |
P150° | 11.1 | kN | |
P180° | 13.8 | kN | |
Pa | 8.9 | kN |
Mass pillow block | 7.01 | kg |
Cap bolt | 2 x 1/2-13 UNC | |||
Cap bolt recommended tightening torque | 149.1 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.5 | in | |
Initial grease fill | 31.185 | g |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ