da | 50 | mm | |
db | 60.325 | mm | |
dc | 47.625 | mm | |
Da | 110 | mm | |
Ca | 50.8 | mm | |
A1 | 69.85 | mm | |
A2 | 115.888 | mm | |
ba | 27.781 | mm | |
H | 147.637 | mm | |
H1 | 76.2 | mm | |
H2 | 28.575 | mm | |
J | min. | 196.85 | mm |
J | max. | 228.6 | mm |
L | 269.875 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 42.862 | mm | |
R2 | 19.05 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 36.513 | mm |
Housing | SAF 310 | |||
Bearing | 1310 ETN9 | |||
| ||||
Lock nut | N 10 | |||
Lock washer | W 10 | |||
Stabilizing ring | 2 x SR-1610 | |||
Labyrinth ring (db shaft position) | LER 35 | |||
Labyrinth ring (dc shaft position) | LER 23 |
End plug (suffix Y) | EPR 5 |
Bearing limiting speed | 8000 | r/min |
P60° | 39.1 | kN | |
P90° | 23.6 | kN | |
P120° | 14.2 | kN | |
P150° | 12.9 | kN | |
P180° | 15.6 | kN | |
Pa | 9.79 | kN |
Mass pillow block | 9.53 | kg |
Cap bolt | 2 x 1/2-13 UNC | |||
Cap bolt recommended tightening torque | 149.1 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 107.73 | g |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ