| da | 130 | mm | |
| db | 149.225 | mm | |
| dc | 125.412 | mm | |
| Da | 230 | mm | |
| Ca | 73.787 | mm | |
| A1 | 130.175 | mm | |
| A2 | 279.4 | mm | |
| S | 4.763 | mm | |
| ba | 57.944 | mm | |
| H | 292.1 | mm | |
| H1 | 152.4 | mm | |
| H2 | 60.325 | mm | |
| L | 466.725 | mm | |
| Threaded holes | |||
| R1 | 79.375 | mm | |
| R2 | 36.513 | mm | |
| RG | 1/2 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 59.531 | mm | |
| Housing | SSAFS 226 | |||
| Bearing | 22226 E | |||
| ||||
| Lock nut | AN 26 | |||
| Lock washer | W 26 | |||
| Stabilizing ring | SR-26-0 | |||
| Taconite seal (db shaft position) | TER 136 | |||
| Taconite seal (dc shaft position) | TER 122 | |||
| End plug (suffix Y) | EPR 27 | |||
| Max. speed for Taconite seal | 520 | r/min |
| P60° | 308 | kN | |
| P90° | 185 | kN | |
| P120° | 125 | kN | |
| P150° | 118 | kN | |
| P180° | 151 | kN | |
| Pa | 98.3 | kN |
| Mass pillow block | 81.2 | kg |
| Cap bolt | 3/4-10 UNC | |||
| Cap bolt recommended tightening torque | 515.2 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Eye bolt | 3/8-16 UNC | |||
| Initial grease fill | 765.45 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
