| da | 50 | mm | |
| db | 60.325 | mm | |
| dc | 47.625 | mm | |
| Da | 110 | mm | |
| Ca | 50.8 | mm | |
| A1 | 69.85 | mm | |
| A2 | 190.5 | mm | |
| ba | 27.781 | mm | |
| H | 147.637 | mm | |
| H1 | 76.2 | mm | |
| H2 | 28.575 | mm | |
| J | min. | 196.85 | mm |
| J | max. | 228.6 | mm |
| L | 269.875 | mm | |
| N1 | 19.05 | mm | |
| Threaded holes | |||
| R1 | 42.862 | mm | |
| R2 | 19.05 | mm | |
| RG | 1/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 36.513 | mm | |
| Housing | SAF 310 | |||
| Bearing | 1310 ETN9 | |||
| ||||
| Lock nut | N 10 | |||
| Lock washer | W 10 | |||
| Stabilizing ring | 2 x SR-1610 | |||
| Taconite seal (db shaft position) | TER 35 | |||
| Taconite seal (dc shaft position) | TER 23 | |||
| End plug (suffix Y) | EPR 5 | |||
| Max. speed for Taconite seal | 1300 | r/min |
| P60° | 39.1 | kN | |
| P90° | 23.6 | kN | |
| P120° | 14.2 | kN | |
| P150° | 12.9 | kN | |
| P180° | 15.6 | kN | |
| Pa | 9.79 | kN |
| Mass pillow block | 9.53 | kg |
| Cap bolt | 2 x 1/2-13 UNC | |||
| Cap bolt recommended tightening torque | 149.1 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.625 | in | |
| Initial grease fill | 107.73 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
