| da | 80 | mm | |
| db | 92.075 | mm | |
| dc | 76.2 | mm | |
| Da | 140 | mm | |
| Ca | 42.799 | mm | |
| A1 | 88.9 | mm | |
| A2 | 126.603 | mm | |
| ba | 30.163 | mm | |
| H | 169.863 | mm | |
| H1 | 88.9 | mm | |
| H2 | 31.75 | mm | |
| J | min. | 244.475 | mm |
| J | max. | 279.4 | mm |
| J1 | 53.975 | mm | |
| L | 330.2 | mm | |
| N1 | 19.05 | mm | |
| Threaded holes | |||
| R1 | 53.181 | mm | |
| R2 | 21.431 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 49.212 | mm | |
| Housing | FSAF 216 | |||
| Bearing | 1216 | |||
| ||||
| Lock nut | AN 16 | |||
| Lock washer | W 16 | |||
| Stabilizing ring | 2 x SR-1516 | |||
| Labyrinth ring (db shaft position) | LOR 82 | |||
| Labyrinth ring (dc shaft position) | LOR 54 | |||
| End plug (suffix Y) | EPR 12 | |||
| Bearing limiting speed | 4500 | r/min |
| P60° | 60.5 | kN | |
| P90° | 36 | kN | |
| P120° | 21.8 | kN | |
| P150° | 19.6 | kN | |
| P180° | 23.1 | kN | |
| Pa | 14.7 | kN |
| Mass pillow block | 15.4 | kg |
| Cap bolt | 2 x 5/8-11 UNC | |||
| Cap bolt recommended tightening torque | 149.1 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Appropriate attachment bolt size | G | 0.625 | in | |
| Initial grease fill | 175.77 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
