| da | 65 | mm | |
| db | 77.787 | mm | |
| dc | 61.913 | mm | |
| Da | 140 | mm | |
| Ca | 57.785 | mm | |
| A1 | 88.9 | mm | |
| A2 | 134.938 | mm | |
| ba | 32.544 | mm | |
| H | 167.481 | mm | |
| H1 | 88.9 | mm | |
| H2 | 31.75 | mm | |
| J | min. | 244.475 | mm |
| J | max. | 279.4 | mm |
| J1 | 53.975 | mm | |
| L | 330.2 | mm | |
| N1 | 19.05 | mm | |
| Threaded holes | |||
| R1 | 53.181 | mm | |
| R2 | 21.431 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 36.513 | mm | |
| Housing | FSAF 313 | |||
| Bearing | 1313 ETN9 | |||
| ||||
| Lock nut | N 13 | |||
| Lock washer | W 13 | |||
| Stabilizing ring | 2 x SR-1613 | |||
| Labyrinth ring (db shaft position) | LOR 55 | |||
| Labyrinth ring (dc shaft position) | LOR 37 | |||
| End plug (suffix Y) | EPR 7 | |||
| Bearing limiting speed | 6000 | r/min |
| P60° | 60.5 | kN | |
| P90° | 36 | kN | |
| P120° | 21.8 | kN | |
| P150° | 19.6 | kN | |
| P180° | 23.1 | kN | |
| Pa | 14.7 | kN |
| Mass pillow block | 15.9 | kg |
| Cap bolt | 2 x 5/8-11 UNC | |||
| Cap bolt recommended tightening torque | 298.3 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.625 | in | |
| Initial grease fill | 175.77 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
