| da | 150 | mm | |
| db | 168.275 | mm | |
| dc | 146.05 | mm | |
| Da | 269.999 | mm | |
| Ca | 82.804 | mm | |
| A1 | 158.75 | mm | |
| A2 | 215.9 | mm | |
| S | 4.763 | mm | |
| ba | 65.088 | mm | |
| H | 317.5 | mm | |
| H1 | 160.35 | mm | |
| H2 | 63.5 | mm | |
| L | 539.75 | mm | |
| Threaded holes | |||
| R1 | 95.25 | mm | |
| R2 | 39.688 | mm | |
| RG | 3/4 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 50.8 | mm | |
| Housing | SSAFS 230 | |||
| Bearing | 22230 CC/W33 | |||
| ||||
| Lock nut | AN 30 | |||
| Lock washer | W 30 | |||
| Stabilizing ring | SR-30-0 | |||
| Labyrinth ring (db shaft position) | LOR 151 | |||
| Labyrinth ring (dc shaft position) | LOR 134 | |||
| End plug (suffix Y) | EPR 17 | |||
| Bearing limiting speed | 3000 | r/min |
| P60° | 394 | kN | |
| P90° | 236 | kN | |
| P120° | 149 | kN | |
| P150° | 136 | kN | |
| P180° | 162 | kN | |
| Pa | 105 | kN |
| Mass pillow block | 110 | kg |
| Cap bolt | 7/8-9 UNC | |||
| Cap bolt recommended tightening torque | 813.5 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Eye bolt | 2 x 3/8-16 UNC | |||
| Initial grease fill | 623.7 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
