| da | 90 | mm | |
| db | 104.775 | mm | |
| dc | 85.725 | mm | |
| Da | 160 | mm | |
| Ca | 62.23 | mm | |
| A1 | 98.425 | mm | |
| A2 | 149.225 | mm | |
| S | 4.763 | mm | |
| ba | 47.625 | mm | |
| H | 192.484 | mm | |
| H1 | 101.6 | mm | |
| H2 | 44.45 | mm | |
| J | min. | 263.525 | mm |
| J | max. | 295.275 | mm |
| J1 | 53.975 | mm | |
| L | 349.25 | mm | |
| N1 | 19.05 | mm | |
| Threaded holes | |||
| R1 | 60.325 | mm | |
| R2 | 27.781 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 38.1 | mm | |
| Housing | SAW 218 | |||
| Bearing | 23218 CC/W33 | |||
| ||||
| Lock nut | AN 18 | |||
| Lock washer | W 18 | |||
| Stabilizing ring | SR-18-15 | |||
| Labyrinth ring (db shaft position) | LOR 112 | |||
| Labyrinth ring (dc shaft position) | LOR 191 | |||
| End plug (suffix Y) | EPR 11 | |||
| Bearing limiting speed | 3800 | r/min |
| P60° | 101 | kN | |
| P90° | 60.9 | kN | |
| P120° | 38.3 | kN | |
| P150° | 34.7 | kN | |
| P180° | 42.3 | kN | |
| Pa | 14.1 | kN |
| Mass pillow block | 23.1 | kg |
| Cap bolt | 2 x 5/8-11 UNC | |||
| Cap bolt recommended tightening torque | 203.4 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Appropriate attachment bolt size | G | 0.625 | in | |
| Initial grease fill | 141.75 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
