| da | 180 | mm | |
| db | 198.438 | mm | |
| dc | 174.625 | mm | |
| Da | 319.999 | mm | |
| Ca | 95.809 | mm | |
| A1 | 180.975 | mm | |
| A2 | 314.325 | mm | |
| S | 4.763 | mm | |
| ba | 75.406 | mm | |
| H | 377.825 | mm | |
| H1 | 190.5 | mm | |
| H2 | 76.2 | mm | |
| J | min. | 530.225 | mm |
| J | max. | 600.075 | mm |
| J1 | 117.475 | mm | |
| L | 679.45 | mm | |
| N1 | 28.575 | mm | |
| Threaded holes | |||
| R1 | 114.3 | mm | |
| R2 | 41.275 | mm | |
| RG | 3/4 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 60.325 | mm | |
| Housing | SAFS 236 | |||
| Bearing | 22236 CC/W33 | |||
| ||||
| Lock nut | AN 36 | |||
| Lock washer | W 36 | |||
| Stabilizing ring | SR-36-30 | |||
| Taconite seal (db shaft position) | TER 165 | |||
| Taconite seal (dc shaft position) | TER 154 | |||
| End plug (suffix Y) | EPR 21 | |||
| Max. speed for Taconite seal | 390 | r/min |
| P60° | 345 | kN | |
| P90° | 207 | kN | |
| P120° | 127 | kN | |
| P150° | 113 | kN | |
| P180° | 113 | kN | |
| Pa | 73.4 | kN |
| Mass pillow block | 178 | kg |
| Cap bolt | 1-8 UNC | |||
| Cap bolt recommended tightening torque | 1220 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Eye bolt | 2 x 3/8-16 UNC | |||
| Appropriate attachment bolt size | G | 1 | in | |
| Initial grease fill | 1304.1 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
