| da | 100 | mm | |
| db | 114.3 | mm | |
| dc | 96.825 | mm | |
| Da | 215.001 | mm | |
| Ca | 82.804 | mm | |
| A1 | 120.65 | mm | |
| A2 | 187.325 | mm | |
| S | 4.763 | mm | |
| ba | 57.944 | mm | |
| H | 258.762 | mm | |
| H1 | 133.35 | mm | |
| H2 | 53.975 | mm | |
| J | min. | 336.55 | mm |
| J | max. | 368.3 | mm |
| J1 | 69.85 | mm | |
| L | 419.1 | mm | |
| N1 | 22.225 | mm | |
| Threaded holes | |||
| R1 | 79.375 | mm | |
| R2 | 30.163 | mm | |
| RG | 1/2 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 51.594 | mm | |
| Housing | SAF 320 | |||
| Bearing | 22320 E | |||
| ||||
| Lock nut | AN 20 | |||
| Lock washer | W 20 | |||
| Stabilizing ring | SR-24-20 | |||
| Labyrinth ring (db shaft position) | LOR 118 | |||
| Labyrinth ring (dc shaft position) | LOR 106 | |||
| End plug (suffix Y) | EPR 12 | |||
| Bearing limiting speed | 3000 | r/min |
| P60° | 185 | kN | |
| P90° | 111 | kN | |
| P120° | 72.5 | kN | |
| P150° | 66.7 | kN | |
| P180° | 81.4 | kN | |
| Pa | 52.5 | kN |
| Mass pillow block | 48.6 | kg |
| Cap bolt | 2 x 1-8 UNC | |||
| Cap bolt recommended tightening torque | 1220 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.75 | in | |
| Initial grease fill | 379.89 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
