da | 90 | mm | |
db | 104.775 | mm | |
dc | 85.725 | mm | |
Da | 190 | mm | |
Ca | 73.787 | mm | |
A1 | 111.125 | mm | |
A2 | 237.331 | mm | |
ba | 42.069 | mm | |
H | 230.981 | mm | |
H1 | 120.65 | mm | |
H2 | 50.8 | mm | |
J | min. | 304.8 | mm |
J | max. | 342.9 | mm |
J1 | 57.15 | mm | |
L | 393.7 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 73.025 | mm | |
R2 | 28.575 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 50.8 | mm |
Housing | SAF 318 | |||
Bearing | 1318 | |||
| ||||
Lock nut | AN 18 | |||
Lock washer | W 18 | |||
Stabilizing ring | 2 x SR-1618 | |||
Taconite seal (db shaft position) | TER 112 | |||
Taconite seal (dc shaft position) | TER 191 |
End plug (suffix Y) | EPR 11 |
Max. speed for Taconite seal | 750 | r/min |
P60° | 128 | kN | |
P90° | 77 | kN | |
P120° | 48.9 | kN | |
P150° | 44.5 | kN | |
P180° | 54.3 | kN | |
Pa | 35.1 | kN |
Mass pillow block | 39.2 | kg |
Cap bolt | 2 x 3/4-10 UNC | |||
Cap bolt recommended tightening torque | 515.2 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 481.95 | g |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ