da | 65 | mm | |
db | 77.787 | mm | |
dc | 61.913 | mm | |
Da | 140 | mm | |
Ca | 57.785 | mm | |
A1 | 88.9 | mm | |
A2 | 209.55 | mm | |
ba | 32.544 | mm | |
H | 167.481 | mm | |
H1 | 88.9 | mm | |
H2 | 31.75 | mm | |
J | min. | 244.475 | mm |
J | max. | 279.4 | mm |
J1 | 53.975 | mm | |
L | 330.2 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 53.181 | mm | |
R2 | 21.431 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 36.513 | mm |
Housing | FSAF 313 | |||
Bearing | 1313 ETN9 | |||
| ||||
Lock nut | N 13 | |||
Lock washer | W 13 | |||
Stabilizing ring | 2 x SR-1613 | |||
Taconite seal (db shaft position) | TER 55 | |||
Taconite seal (dc shaft position) | TER 37 |
End plug (suffix Y) | EPR 7 |
Max. speed for Taconite seal | 1000 | r/min |
P60° | 60.5 | kN | |
P90° | 36 | kN | |
P120° | 21.8 | kN | |
P150° | 19.6 | kN | |
P180° | 23.1 | kN | |
Pa | 14.7 | kN |
Mass pillow block | 15.9 | kg |
Cap bolt | 2 x 5/8-11 UNC | |||
Cap bolt recommended tightening torque | 298.3 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 175.77 | g |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ