| da | 130 | mm | |
| db | 149.225 | mm | |
| dc | 125.412 | mm | |
| Da | 279.999 | mm | |
| Ca | 102.794 | mm | |
| A1 | 158.75 | mm | |
| A2 | 288.925 | mm | |
| S | 4.763 | mm | |
| ba | 72.231 | mm | |
| H | 336.55 | mm | |
| H1 | 169.875 | mm | |
| H2 | 66.675 | mm | |
| J | min. | 441.325 | mm |
| J | max. | 488.95 | mm |
| J1 | 95.25 | mm | |
| L | 558.8 | mm | |
| N1 | 28.575 | mm | |
| Threaded holes | |||
| R1 | 104.775 | mm | |
| R2 | 33.337 | mm | |
| RG | 3/4 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 61.913 | mm | |
| Housing | SAF 326 | |||
| Bearing | 22326 CC/W33 | |||
| ||||
| Lock nut | AN 26 | |||
| Lock washer | W 26 | |||
| Stabilizing ring | SR-0-26 | |||
| Taconite seal (db shaft position) | TER 136 | |||
| Taconite seal (dc shaft position) | TER 122 | |||
| End plug (suffix Y) | EPR 27 | |||
| Max. speed for Taconite seal | 520 | r/min |
| P60° | 226 | kN | |
| P90° | 136 | kN | |
| P120° | 85.9 | kN | |
| P150° | 78.3 | kN | |
| P180° | 94.3 | kN | |
| Pa | 60.9 | kN |
| Mass pillow block | 100 | kg |
| Cap bolt | 4 x 3/4-10 UNC | |||
| Cap bolt recommended tightening torque | 203.4 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Eye bolt | 2 x 3/8-16 UNC | |||
| Appropriate attachment bolt size | G | 1 | in | |
| Initial grease fill | 793.8 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
