da | 90 | mm | |
db | 104.775 | mm | |
dc | 85.725 | mm | |
Da | 160 | mm | |
Ca | 49.809 | mm | |
A1 | 98.425 | mm | |
A2 | 210.344 | mm | |
ba | 34.925 | mm | |
H | 192.484 | mm | |
H1 | 101.6 | mm | |
H2 | 41.275 | mm | |
J | min. | 263.525 | mm |
J | max. | 295.275 | mm |
J1 | 53.975 | mm | |
L | 349.25 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.781 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 38.1 | mm |
Housing | FSAF 218 | |||
Bearing | 1218 | |||
| ||||
Lock nut | AN 18 | |||
Lock washer | W 18 | |||
Stabilizing ring | 2 x SR-1518 | |||
Taconite seal (db shaft position) | TER 112 | |||
Taconite seal (dc shaft position) | TER 191 |
End plug (suffix Y) | EPR 14 |
Max. speed for Taconite seal | 750 | r/min |
P60° | 101 | kN | |
P90° | 60.9 | kN | |
P120° | 38.3 | kN | |
P150° | 34.7 | kN | |
P180° | 42.3 | kN | |
Pa | 27.1 | kN |
Mass pillow block | 20 | kg |
Cap bolt | 2 x 5/8-11 UNC | |||
Cap bolt recommended tightening torque | 149.1 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 286.33 | g |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ