da | 180 | mm | |
db | 114.3 | mm | |
dc | 96.838 | mm | |
Da | 180 | mm | |
Ca | 70.104 | mm | |
A1 | 111.125 | mm | |
A2 | 173.037 | mm | |
S | 4.763 | mm | |
ba | 52.388 | mm | |
H | 222.25 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
J1 | 60.325 | mm | |
L | 387.35 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 65.088 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 60.325 | mm |
Housing | SAW 220 | |||
Bearing | 23220 CC/W33 | |||
| ||||
Lock nut | AN 20 | |||
Lock washer | W 20 | |||
Stabilizing ring | SR-20-17 | |||
Labyrinth ring (db shaft position) | LOR 118 | |||
Labyrinth ring (dc shaft position) | LOR 106 |
End plug (suffix Y) | EPR 12 |
Bearing limiting speed | 3400 | r/min |
P60° | 104 | kN | |
P90° | 62.3 | kN | |
P120° | 39.1 | kN | |
P150° | 35.6 | kN | |
P180° | 42.3 | kN | |
Pa | 18.1 | kN |
Mass pillow block | 34.5 | kg |
Cap bolt | 2 x 3/4-10 UNC | |||
Cap bolt recommended tightening torque | 515.2 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 181.44 | g |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ