da | 190 | mm | |
db | 212.725 | mm | |
dc | 184.15 | mm | |
Da | 339.999 | mm | |
Ca | 129.819 | mm | |
A1 | 190.5 | mm | |
A2 | 361.95 | mm | |
S | 4.763 | mm | |
ba | 92.869 | mm | |
H | 401.637 | mm | |
H1 | 200.025 | mm | |
H2 | 79.375 | mm | |
J | min. | 549.275 | mm |
J | max. | 619.125 | mm |
J1 | 114.3 | mm | |
L | 711.2 | mm | |
N1 | 34.925 | mm | |
Threaded holes | |||
R1 | 111.125 | mm | |
R2 | 42.069 | mm | |
RG | 1 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 63.5 | mm |
Housing | SAW 238 | |||
Bearing | 23238 CC/W33 | |||
| ||||
Lock nut | AN 38 | |||
Lock washer | W 38 | |||
Stabilizing ring | SR-38-32 | |||
Taconite seal (db shaft position) | TER 171 | |||
Taconite seal (dc shaft position) | TER 160 |
End plug (suffix Y) | EPR 21 |
Max. speed for Taconite seal | 365 | r/min |
P60° | 290 | kN | |
P90° | 173 | kN | |
P120° | 107 | kN | |
P150° | 94.3 | kN | |
P180° | 113 | kN | |
Pa | 68.5 | kN |
Mass pillow block | 164 | kg |
Cap bolt | 4 x 7/8-9 UNC | |||
Cap bolt recommended tightening torque | 271.2 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt | 2 x 1/2-13 UNC | |||
Appropriate attachment bolt size | G | 1.25 | in | |
Initial grease fill | 1672.65 | g |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ