| da | 80 | mm | |
| db | 92.075 | mm | |
| dc | 76.2 | mm | |
| Da | 170 | mm | |
| Ca | 67.793 | mm | |
| A1 | 98.425 | mm | |
| A2 | 160.338 | mm | |
| ba | 36.513 | mm | |
| H | 209.55 | mm | |
| H1 | 107.95 | mm | |
| H2 | 44.45 | mm | |
| J | min. | 269.875 | mm |
| J | max. | 320.675 | mm |
| J1 | 53.975 | mm | |
| L | 361.95 | mm | |
| N1 | 19.05 | mm | |
| Threaded holes | |||
| R1 | 63.5 | mm | |
| R2 | 26.988 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 46.038 | mm | |
| Housing | FSAF 316 | |||
| Bearing | 1316 | |||
| ||||
| Lock nut | AN 16 | |||
| Lock washer | W 16 | |||
| Stabilizing ring | 2 x SR-1616 | |||
| Labyrinth ring (db shaft position) | LOR 84 | |||
| Labyrinth ring (dc shaft position) | LOR 60 | |||
| End plug (suffix Y) | EPR 10 | |||
| Bearing limiting speed | 5300 | r/min |
| P60° | 92.5 | kN | |
| P90° | 55.6 | kN | |
| P120° | 33.8 | kN | |
| P150° | 30.7 | kN | |
| P180° | 36.9 | kN | |
| Pa | 23.6 | kN |
| Mass pillow block | 28.6 | kg |
| Cap bolt | 2 x 5/8-11 UNC | |||
| Cap bolt recommended tightening torque | 298.3 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.625 | in | |
| Initial grease fill | 365.71 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
