da | 180 | mm | |
db | 198.438 | mm | |
dc | 174.625 | mm | |
Da | 319.999 | mm | |
Ca | 121.818 | mm | |
A1 | 180.975 | mm | |
A2 | 317.5 | mm | |
S | 4.763 | mm | |
ba | 88.106 | mm | |
H | 377.825 | mm | |
H1 | 190.5 | mm | |
H2 | 76.2 | mm | |
J | min. | 530.225 | mm |
J | max. | 600.075 | mm |
J1 | 117.475 | mm | |
L | 679.45 | mm | |
N1 | 28.575 | mm | |
Threaded holes | |||
R1 | 114.3 | mm | |
R2 | 41.275 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 61.913 | mm |
Housing | SAW 236 | |||
Bearing | 23236 CC/W33 | |||
| ||||
Lock nut | AN 36 | |||
Lock washer | W 36 | |||
Stabilizing ring | SR-36-30 | |||
Taconite seal (db shaft position) | TER 165 | |||
Taconite seal (dc shaft position) | TER 154 |
End plug (suffix Y) | EPR 21 |
Max. speed for Taconite seal | 390 | r/min |
P60° | 234 | kN | |
P90° | 140 | kN | |
P120° | 84.5 | kN | |
P150° | 75.6 | kN | |
P180° | 89 | kN | |
Pa | 60.5 | kN |
Mass pillow block | 137 | kg |
Cap bolt | 4 x 3/4-10 UNC | |||
Cap bolt recommended tightening torque | 515.2 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Eye bolt | 2 x 3/8-16 UNC | |||
Appropriate attachment bolt size | G | 1 | in | |
Initial grease fill | 1304.1 | g |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ