da | 45 | mm | |
db | 53.975 | mm | |
dc | 42.875 | mm | |
Da | 100 | mm | |
Ca | 45.796 | mm | |
A1 | 69.85 | mm | |
A2 | 106.362 | mm | |
S | 4.763 | mm | |
ba | 30.956 | mm | |
H | 134.938 | mm | |
H1 | 69.85 | mm | |
H2 | 25.4 | mm | |
J | min. | 187.325 | mm |
J | max. | 200.025 | mm |
L | 244.475 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 38.1 | mm | |
R2 | 17.462 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 32.544 | mm |
Housing | SAF 309 | |||
Bearing | 22309 E | |||
| ||||
Lock nut | N 09 | |||
Lock washer | W 09 | |||
Stabilizing ring | SR-11-9 | |||
Labyrinth ring (db shaft position) | LER 28 | |||
Labyrinth ring (dc shaft position) | LER 20 |
End plug (suffix Y) | EPR 4 |
Bearing limiting speed | 7000 | r/min |
P60° | 35.1 | kN | |
P90° | 20.9 | kN | |
P120° | 13.3 | kN | |
P150° | 12 | kN | |
P180° | 14.7 | kN | |
Pa | 9.34 | kN |
Mass pillow block | 8.62 | kg |
Cap bolt | 2 x 1/2-13 UNC | |||
Cap bolt recommended tightening torque | 149.1 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 39.69 | g |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ