| da | 90 | mm | |
| db | 104.775 | mm | |
| dc | 85.725 | mm | |
| Da | 160 | mm | |
| Ca | 49.809 | mm | |
| A1 | 98.425 | mm | |
| A2 | 206.375 | mm | |
| S | 4.763 | mm | |
| ba | 40.481 | mm | |
| H | 196.85 | mm | |
| H1 | 101.6 | mm | |
| H2 | 41.275 | mm | |
| L | 349.25 | mm | |
| Threaded holes | |||
| R1 | 60.325 | mm | |
| R2 | 27.781 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 38.1 | mm | |
| Housing | SAFS 218 | |||
| Bearing | 22218 E | |||
| ||||
| Lock nut | AN 18 | |||
| Lock washer | W 18 | |||
| Stabilizing ring | SR-18-15 | |||
| Taconite seal (db shaft position) | TER 112 | |||
| Taconite seal (dc shaft position) | TER 191 | |||
| End plug (suffix Y) | EPR 11 | |||
| Max. speed for Taconite seal | 750 | r/min |
| P60° | 141 | kN | |
| P90° | 84.5 | kN | |
| P120° | 53.4 | kN | |
| P150° | 48 | kN | |
| P180° | 58.7 | kN | |
| Pa | 37.8 | kN |
| Mass pillow block | 29.9 | kg |
| Cap bolt | 1/2-13 UNC | |||
| Cap bolt recommended tightening torque | 149.1 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Initial grease fill | 286.33 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
