| da | 200 | mm | |
| db | 222.25 | mm | |
| dc | 193.675 | mm | |
| Da | 419.999 | mm | |
| Ca | 147.803 | mm | |
| A1 | 228.6 | mm | |
| A2 | 379.413 | mm | |
| S | 4.763 | mm | |
| ba | 103.188 | mm | |
| H | 495.3 | mm | |
| H1 | 250.825 | mm | |
| H2 | 101.6 | mm | |
| J | min. | 666.75 | mm |
| J | max. | 749.3 | mm |
| J1 | 139.7 | mm | |
| L | 869.95 | mm | |
| N1 | 41.275 | mm | |
| Threaded holes | |||
| R1 | 163.512 | mm | |
| R2 | 50.8 | mm | |
| RG | 1 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 87.313 | mm | |
| Housing | SAFS 340 | |||
| Bearing | 22340 CC/W33 | |||
| ||||
| Lock nut | AN 40 | |||
| Lock washer | W 40 | |||
| Stabilizing ring | SR-0-40 | |||
| Taconite seal (db shaft position) | TER 175 | |||
| Taconite seal (dc shaft position) | TER 164 | |||
| End plug (suffix Y) | EPR 22 | |||
| Max. speed for Taconite seal | 350 | r/min |
| P60° | 669 | kN | |
| P90° | 400 | kN | |
| P120° | 249 | kN | |
| P150° | 222 | kN | |
| P180° | 267 | kN | |
| Pa | 173 | kN |
| Mass pillow block | 417 | kg |
| Cap bolt | 4 x 1 1/2-6 UNC | |||
| Cap bolt recommended tightening torque | 4284.4 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Eye bolt | 2 x 1/2-13 UNC | |||
| Appropriate attachment bolt size | G | 1.5 | in | |
| Initial grease fill | 3515.4 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
