da | 65 | mm | |
db | 77.787 | mm | |
dc | 61.913 | mm | |
Da | 120 | mm | |
Ca | 39.014 | mm | |
A1 | 79.375 | mm | |
A2 | 190.5 | mm | |
S | 3.969 | mm | |
ba | 31.75 | mm | |
H | 147.637 | mm | |
H1 | 76.2 | mm | |
H2 | 25.4 | mm | |
J | min. | 206.375 | mm |
J | max. | 241.3 | mm |
L | 279.4 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 44.45 | mm | |
R2 | 15.875 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 27.781 | mm |
Housing | SAF 213 | |||
Bearing | 22213 E | |||
| ||||
Lock nut | N 13 | |||
Lock washer | W 13 | |||
Stabilizing ring | SR-13-0 | |||
Taconite seal (db shaft position) | TER 55 | |||
Taconite seal (dc shaft position) | TER 37 |
End plug (suffix Y) | EPR 7 |
Max. speed for Taconite seal | 1000 | r/min |
P60° | 50.3 | kN | |
P90° | 30.2 | kN | |
P120° | 18 | kN | |
P150° | 16 | kN | |
P180° | 19.1 | kN | |
Pa | 12 | kN |
Mass pillow block | 9.98 | kg |
Cap bolt | 2 x 1/2-13 UNC | |||
Cap bolt recommended tightening torque | 81.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 53.865 | g |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ