| da | 60 | mm | |
| db | 73.025 | mm | |
| dc | 57.15 | mm | |
| Da | 130 | mm | |
| Ca | 55.804 | mm | |
| A1 | 79.375 | mm | |
| A2 | 207.169 | mm | |
| ba | 30.956 | mm | |
| H | 161.925 | mm | |
| H1 | 82.55 | mm | |
| H2 | 30.163 | mm | |
| J | min. | 219.075 | mm |
| J | max. | 244.475 | mm |
| L | 285.75 | mm | |
| N1 | 19.05 | mm | |
| Threaded holes | |||
| R1 | 49.212 | mm | |
| R2 | 19.05 | mm | |
| RG | 1/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 34.925 | mm | |
| Housing | SAF 312 | |||
| Bearing | 1312 ETN9 | |||
| ||||
| Lock nut | N 12 | |||
| Lock washer | W 12 | |||
| Stabilizing ring | 2 x SR-1612 | |||
| Taconite seal (db shaft position) | TER 47 | |||
| Taconite seal (dc shaft position) | TER 33 | |||
| End plug (suffix Y) | EPR 7 | |||
| Max. speed for Taconite seal | 1075 | r/min |
| P60° | 49.4 | kN | |
| P90° | 29.8 | kN | |
| P120° | 18.2 | kN | |
| P150° | 16.5 | kN | |
| P180° | 20 | kN | |
| Pa | 12.9 | kN |
| Mass pillow block | 13.1 | kg |
| Cap bolt | 2 x 1/2-13 UNC | |||
| Cap bolt recommended tightening torque | 149.1 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.625 | in | |
| Initial grease fill | 175.77 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
