| da | 85 | mm | |
| db | 100.025 | mm | |
| dc | 80.975 | mm | |
| Da | 180 | mm | |
| Ca | 69.799 | mm | |
| A1 | 111.125 | mm | |
| A2 | 235.744 | mm | |
| S | 4.763 | mm | |
| ba | 48.419 | mm | |
| H | 222.25 | mm | |
| H1 | 114.3 | mm | |
| H2 | 44.45 | mm | |
| J | min. | 295.275 | mm |
| J | max. | 333.375 | mm |
| L | 387.35 | mm | |
| N1 | 25.4 | mm | |
| Threaded holes | |||
| R1 | 66.675 | mm | |
| R2 | 30.163 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 44.45 | mm | |
| Housing | SAF 317 | |||
| Bearing | 22317 E | |||
| ||||
| Lock nut | AN 17 | |||
| Lock washer | W 17 | |||
| Stabilizing ring | SR-20-17 | |||
| Taconite seal (db shaft position) | TER 109 | |||
| Taconite seal (dc shaft position) | TER 188 | |||
| End plug (suffix Y) | EPR 11 | |||
| Max. speed for Taconite seal | 775 | r/min |
| P60° | 94.3 | kN | |
| P90° | 56.5 | kN | |
| P120° | 35.6 | kN | |
| P150° | 32 | kN | |
| P180° | 38.3 | kN | |
| Pa | 24.5 | kN |
| Mass pillow block | 32 | kg |
| Cap bolt | 2 x 3/4-10 UNC | |||
| Cap bolt recommended tightening torque | 515.2 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.875 | in | |
| Initial grease fill | 181.44 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
