da | 70 | mm | |
db | 82.55 | mm | |
dc | 66.675 | mm | |
Da | 150 | mm | |
Ca | 60.808 | mm | |
A1 | 88.9 | mm | |
A2 | 210.344 | mm | |
ba | 34.131 | mm | |
H | 187.325 | mm | |
H1 | 95.25 | mm | |
H2 | 33.337 | mm | |
J | min. | 250.825 | mm |
J | max. | 279.4 | mm |
L | 330.2 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 53.975 | mm | |
R2 | 22.225 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 39.688 | mm |
Housing | SAF 314 | |||
Bearing | 1314 | |||
| ||||
Lock nut | N 14 | |||
Lock washer | W 14 | |||
Stabilizing ring | 2 x SR-1614 | |||
Taconite seal (db shaft position) | TER 64 | |||
Taconite seal (dc shaft position) | TER 43 |
End plug (suffix Y) | EPR 8 |
Max. speed for Taconite seal | 925 | r/min |
P60° | 92.5 | kN | |
P90° | 55.6 | kN | |
P120° | 34.7 | kN | |
P150° | 30.7 | kN | |
P180° | 37.8 | kN | |
Pa | 24.5 | kN |
Mass pillow block | 18.2 | kg |
Cap bolt | 2 x 5/8-11 UNC | |||
Cap bolt recommended tightening torque | 298.3 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 218.29 | g |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ