| da | 65 | mm | |
| db | 77.787 | mm | |
| dc | 61.913 | mm | |
| Da | 120 | mm | |
| Ca | 39.014 | mm | |
| A1 | 79.375 | mm | |
| A2 | 112.713 | mm | |
| S | 3.969 | mm | |
| ba | 31.75 | mm | |
| H | 147.637 | mm | |
| H1 | 76.2 | mm | |
| H2 | 25.4 | mm | |
| J | min. | 206.375 | mm |
| J | max. | 241.3 | mm |
| L | 279.4 | mm | |
| N1 | 19.05 | mm | |
| Threaded holes | |||
| R1 | 44.45 | mm | |
| R2 | 15.875 | mm | |
| RG | 1/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 27.781 | mm | |
| Housing | SAF 213 | |||
| Bearing | 22213 E | |||
| ||||
| Lock nut | N 13 | |||
| Lock washer | W 13 | |||
| Stabilizing ring | SR-13-0 | |||
| Labyrinth ring (db shaft position) | LOR 55 | |||
| Labyrinth ring (dc shaft position) | LOR 37 | |||
| End plug (suffix Y) | EPR 7 | |||
| Bearing limiting speed | 7000 | r/min |
| P60° | 50.3 | kN | |
| P90° | 30.2 | kN | |
| P120° | 18 | kN | |
| P150° | 16 | kN | |
| P180° | 19.1 | kN | |
| Pa | 12 | kN |
| Mass pillow block | 9.98 | kg |
| Cap bolt | 2 x 1/2-13 UNC | |||
| Cap bolt recommended tightening torque | 81.3 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Appropriate attachment bolt size | G | 0.625 | in | |
| Initial grease fill | 53.865 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
