| ||||
| Compliance with standard | JIS | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals with additional flingers | |||
| d | 45 | mm | |
| d1 | ≈ | 62.51 | mm |
| d3 | 70 | mm | |
| A | 49 | mm | |
| A1 | 16 | mm | |
| A2 | 37 | mm | |
| A5 | 33 | mm | |
| B1 | 55 | mm | |
| H | 117 | mm | |
| H1 | 102 | mm | |
| H2 | 83 | mm | |
| L | 148 | mm | |
| L1 | 90 | mm | |
| L2 | 16 | mm | |
| L3 | 86 | mm | |
| N | 29 | mm | |
| N1 | 19 | mm | |
| N2 | 49 | mm | |
| s1 | 31.1 | mm | |
| Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). | |||
| Threaded hole | |||
| RG | 1/8-27 NPT | ||
| R1 | 3 | mm | |
| Rα | 30 | ° | |
| Grease fitting | |||
| DN | 6.589 | mm | |
| SWN | 11.11 | mm | |
| GN | 1/8-27 NPT | ||
| Basic dynamic load rating | C | 35.1 | kN | |
| Basic static load rating | C0 | 23.2 | kN | |
| Fatigue load limit | Pu | 0.98 | kN | |
| Limiting speed | 3300 | r/min |
| Mass bearing unit | 2.7 | kg |
| Associated spanner | HN 10-11 | |||
| Recommended lock nut tightening angle | α | 115 | ° | |
| Housing | T 210 | |||
| Bearing | UK 210 K/H | |||
| Adapter sleeve | H 2310 | |||
| End cover | ECY 210 | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
