| Compliance with standard | North American standard | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals with additional flingers | |||
| d | 49.212 | mm | |
| d1 | ≈ | 62.51 | mm |
| A | 49.2 | mm | |
| A1 | 17.5 | mm | |
| A2 | 37.3 | mm | |
| A5 | 33 | mm | |
| B | 51.6 | mm | |
| B4 | 9 | mm | |
| H | 116.7 | mm | |
| H1 | 102 | mm | |
| H2 | 83.3 | mm | |
| L | 148.4 | mm | |
| L1 | 89.7 | mm | |
| L2 | 15.9 | mm | |
| L3 | 85.7 | mm | |
| N | 28 | mm | |
| N1 | 19.1 | mm | |
| N2 | 49.2 | mm | |
| s1 | 32.6 | mm | |
| Threaded hole | |||
| RG | 1/8-27 NPT | ||
| R1 | 2.8 | mm | |
| Rα | 30 | ° | |
| Grease fitting | |||
| DN | 6.579 | mm | |
| SWN | 11.113 | mm | |
| GN | 1/8-27 NPT | ||
| Basic dynamic load rating | C | 35.1 | kN | |
| Basic static load rating | C0 | 23.2 | kN | |
| Fatigue load limit | Pu | 0.98 | kN | |
| Limiting speed | 4000 | r/min |
with shaft tolerance h6
| Mass bearing unit | 2.55 | kg |
| Grub (set) screw | G2 | 3/8-24 UNF | ||
| Hexagonal key size for grub screw | N | 4.763 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Housing | WSTU 510 | |||
| Bearing | YAR 210-115-2F | |||
| End cover | ECY 210 | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
