| d | 80 | mm | |
| D | 125 | mm | |
| B | 22 | mm | |
| d1 | 93.9 | mm | |
| d2 | 93.9 | mm | |
| D1 | 111.1 | mm | |
| b | 2.8 | mm | |
| C1 | 11.1 | mm | |
| C2 | 4.4 | mm | |
| C3 | 3.8 | mm | |
| r1,2 | min. | 1.1 | mm |
| r3,4 | min. | 0.6 | mm |
| a | 24.8 | mm |
| da | min. | 86 | mm |
| db | min. | 86 | mm |
| Da | max. | 119 | mm |
| Db | max. | 121 | mm |
| ra | max. | 1 | mm |
| rb | max. | 0.6 | mm |
| dn | 96.9 | mm |
| Basic dynamic load rating | C | 65 | kN | |
| Basic static load rating | C0 | 61 | kN | |
| Fatigue load limit | Pu | 2.55 | kN | |
| Attainable speed for grease lubrication | 10000 | r/min | ||
| Attainable speed for oil-air lubrication | 17000 | r/min | ||
| Contact angle | α | 15 | ° | |
| Ball diameter | Dw | 14.288 | mm | |
| Number of balls | z | 20 | ||
| Reference grease quantity | Gref | 11.1 | cm³ | |
| Preload and stiffness (back-to-back, face-to-face) | ||||
| Preload class A | GA | 240 | N | |
| Static axial stiffness, preload class A | 92 | N/µm | ||
| Preload class B | GB | 480 | N | |
| Static axial stiffness, preload class B | 125 | N/µm | ||
| Preload class C | GC | 960 | N | |
| Static axial stiffness, preload class C | 175 | N/µm | ||
| Preload class D | GD | 1920 | N | |
| Static axial stiffness, preload class D | 254 | N/µm | ||
| Calculation factors | ||||
| Calculation factor | f | 1.13 | ||
| Calculation factor | f1 | 1 | ||
| Calculation factor | f2A | 1 | ||
| Calculation factor | f2B | 1.02 | ||
| Calculation factor | f2C | 1.05 | ||
| Calculation factor | f2D | 1.09 | ||
| Calculation factor | fHC | 1 | ||
| Calculation factor | f0 | 15.5 | ||
| Mass bearing | 0.85 | kg |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
