| d | 60 | mm | |
| D | 85 | mm | |
| B | 13 | mm | |
| d1 | 67.75 | mm | |
| d2 | 65.7 | mm | |
| D1 | 77.3 | mm | |
| K | 0.5 | mm | |
| C1 | 3.83 | mm | |
| r1,2 | min. | 1 | mm |
| r3,4 | min. | 0.3 | mm |
| a | 24.6 | mm |
| da | min. | 64.6 | mm |
| db | min. | 62 | mm |
| Da | max. | 80.4 | mm |
| Db | max. | 83 | mm |
| ra | max. | 1 | mm |
| rb | max. | 0.3 | mm |
| dn | 69.6 | mm |
| Basic dynamic load rating | C | 15.3 | kN | |
| Basic static load rating | C0 | 11.2 | kN | |
| Fatigue load limit | Pu | 0.475 | kN | |
| Attainable speed for grease lubrication | 19500 | r/min | ||
| Attainable speed for oil-air lubrication | 30000 | r/min | ||
| Contact angle | α | 25 | ° | |
| Ball diameter | Dw | 7.938 | mm | |
| Number of balls | z | 23 | ||
| Reference grease quantity | Gref | 2.5 | cm³ | |
| Preload and stiffness (back-to-back, face-to-face) | ||||
| Preload class A | GA | 139 | N | |
| Static axial stiffness, preload class A | 115 | N/µm | ||
| Preload class B | GB | 418 | N | |
| Static axial stiffness, preload class B | 173 | N/µm | ||
| Preload class C | GC | 836 | N | |
| Static axial stiffness, preload class C | 228 | N/µm | ||
| Calculation factors | ||||
| Calculation factor | f | 1.13 | ||
| Calculation factor | f1 | 0.99 | ||
| Calculation factor | f2A | 1 | ||
| Calculation factor | f2B | 1.04 | ||
| Calculation factor | f2C | 1.07 | ||
| Calculation factor | fHC | 1 | ||
| Calculation factor | e | 0.68 | ||
| Calculation factor (single, tandem) | Y2 | 0.87 | ||
| Calculation factor (single, tandem) | Y0 | 0.38 | ||
| Calculation factor (single, tandem) | X2 | 0.41 | ||
| Calculation factor (back-to-back, face-to-face) | Y1 | 0.92 | ||
| Calculation factor (back-to-back, face-to-face) | Y2 | 1.41 | ||
| Calculation factor (back-to-back, face-to-face) | Y0 | 0.76 | ||
| Calculation factor (back-to-back, face-to-face) | X2 | 0.67 | ||
| Mass bearing | 0.19 | kg |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
