| d | 110 | mm | |
| D | 150 | mm | |
| B | 20 | mm | |
| d1 | 122.3 | mm | |
| d2 | 122.3 | mm | |
| D1 | 137.7 | mm | |
| b | 2.3 | mm | |
| C1 | 10.9 | mm | |
| C2 | 4 | mm | |
| C3 | 3 | mm | |
| r1,2 | min. | 1.1 | mm |
| r3,4 | min. | 0.6 | mm |
| a | 27.5 | mm |
| da | min. | 116 | mm |
| db | min. | 116 | mm |
| Da | max. | 144 | mm |
| Db | max. | 146 | mm |
| ra | max. | 1 | mm |
| rb | max. | 0.6 | mm |
| dn | 125.6 | mm |
| Basic dynamic load rating | C | 62.4 | kN | |
| Basic static load rating | C0 | 72 | kN | |
| Fatigue load limit | Pu | 2.7 | kN | |
| Attainable speed for grease lubrication | 8000 | r/min | ||
| Attainable speed for oil-air lubrication | 13000 | r/min | ||
| Contact angle | α | 15 | ° | |
| Ball diameter | Dw | 12.7 | mm | |
| Number of balls | z | 28 | ||
| Reference grease quantity | Gref | 11.4 | cm³ | |
| Preload and stiffness (back-to-back, face-to-face) | ||||
| Preload class A | GA | 230 | N | |
| Static axial stiffness, preload class A | 113 | N/µm | ||
| Preload class B | GB | 460 | N | |
| Static axial stiffness, preload class B | 156 | N/µm | ||
| Preload class C | GC | 920 | N | |
| Static axial stiffness, preload class C | 221 | N/µm | ||
| Preload class D | GD | 1840 | N | |
| Static axial stiffness, preload class D | 325 | N/µm | ||
| Calculation factors | ||||
| Calculation factor | f | 1.26 | ||
| Calculation factor | f1 | 1 | ||
| Calculation factor | f2A | 1 | ||
| Calculation factor | f2B | 1.04 | ||
| Calculation factor | f2C | 1.09 | ||
| Calculation factor | f2D | 1.15 | ||
| Calculation factor | fHC | 1 | ||
| Calculation factor | f0 | 16.5 | ||
| Mass bearing | 0.86 | kg |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
