| da | 75 | mm | |
| db | 87.313 | mm | |
| dc | 71.438 | mm | |
| Da | 130 | mm | |
| Ca | 37.008 | mm | |
| A1 | 79.375 | mm | |
| A2 | 196.85 | mm | |
| ba | 30.163 | mm | |
| H | 157.559 | mm | |
| H1 | 82.55 | mm | |
| H2 | 28.575 | mm | |
| J | min. | 219.075 | mm |
| J | max. | 244.475 | mm |
| J1 | 47.625 | mm | |
| L | 285.75 | mm | |
| N1 | 15.875 | mm | |
| Threaded holes | |||
| R1 | 46.038 | mm | |
| R2 | 21.431 | mm | |
| RG | 1/4 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 31.75 | mm | |
| Housing | FSAF 215 | |||
| Bearing | 1215 | |||
| ||||
| Lock nut | AN 15 | |||
| Lock washer | W 15 | |||
| Stabilizing ring | 2 x SR-15-0 | |||
| Taconite seal (db shaft position) | TER 79 | |||
| Taconite seal (dc shaft position) | TER 46 | |||
| End plug (suffix Y) | EPR 8 | |||
| Max. speed for Taconite seal | 900 | r/min |
| P60° | 54.3 | kN | |
| P90° | 32.5 | kN | |
| P120° | 20 | kN | |
| P150° | 18.2 | kN | |
| P180° | 22.2 | kN | |
| Pa | 14.2 | kN |
| Mass pillow block | 12.2 | kg |
| Cap bolt | 2 x 1/2-13 UNC | |||
| Cap bolt recommended tightening torque | 81.3 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Appropriate attachment bolt size | G | 0.5 | in | |
| Initial grease fill | 136.08 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
