| da | 140 | mm | |
| db | 158.75 | mm | |
| dc | 134.938 | mm | |
| Da | 250 | mm | |
| Ca | 92.939 | mm | |
| A1 | 149.225 | mm | |
| A2 | 260.35 | mm | |
| S | 4.763 | mm | |
| ba | 73.025 | mm | |
| H | 298.45 | mm | |
| H1 | 152.4 | mm | |
| H2 | 60.325 | mm | |
| J | min. | 406.4 | mm |
| J | max. | 434.975 | mm |
| J1 | 85.725 | mm | |
| L | 511.175 | mm | |
| N1 | 28.575 | mm | |
| Threaded holes | |||
| R1 | 101.6 | mm | |
| R2 | 30.163 | mm | |
| RG | 3/8 NPT | ||
| PG | 3/8 NPT | ||
| Oil level | |||
| h | 51.594 | mm | |
| Housing | SAW 228 | |||
| Bearing | 23228 CC/W33 | |||
| ||||
| Lock nut | AN 28 | |||
| Lock washer | W 28 | |||
| Stabilizing ring | SR-28-0 | |||
| Taconite seal (db shaft position) | TER 144 | |||
| Taconite seal (dc shaft position) | TER 127 | |||
| End plug (suffix Y) | EPR 16 | |||
| Max. speed for Taconite seal | 490 | r/min |
| P60° | 193 | kN | |
| P90° | 116 | kN | |
| P120° | 73.8 | kN | |
| P150° | 66.7 | kN | |
| P180° | 81.4 | kN | |
| Pa | 37 | kN |
| Mass pillow block | 90.3 | kg |
| Cap bolt | 4 x 3/4-10 UNC | |||
| Cap bolt recommended tightening torque | 515.2 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Eye bolt | 3/8-16 UNC | |||
| Appropriate attachment bolt size | G | 1 | in | |
| Initial grease fill | 850.5 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
