| da | 220 | mm | |
| db | 242.887 | mm | |
| dc | 211.137 | mm | |
| Da | 399.999 | mm | |
| Ca | 153.797 | mm | |
| A1 | 222.25 | mm | |
| A2 | 407.988 | mm | |
| S | 4.763 | mm | |
| ba | 107.95 | mm | |
| H | 474.663 | mm | |
| H1 | 241.3 | mm | |
| H2 | 95.25 | mm | |
| J | min. | 628.65 | mm |
| J | max. | 708.025 | mm |
| J1 | 133.35 | mm | |
| L | 831.85 | mm | |
| N1 | 41.275 | mm | |
| Threaded holes | |||
| R1 | 130.175 | mm | |
| R2 | 46.831 | mm | |
| RG | 1 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 80.963 | mm | |
| Housing | SAW 244 | |||
| Bearing | 23244 CC/W33 | |||
| ||||
| Lock nut | N 44 | |||
| Lock washer | W 44 | |||
| Stabilizing ring | SR-44-38 | |||
| Taconite seal (db shaft position) | TER 179 | |||
| Taconite seal (dc shaft position) | TER 170 | |||
| End plug (suffix Y) | EPR 24 | |||
| Max. speed for Taconite seal | 315 | r/min |
| P60° | 423 | kN | |
| P90° | 254 | kN | |
| P120° | 160 | kN | |
| P150° | 145 | kN | |
| P180° | 173 | kN | |
| Pa | 95.2 | kN |
| Mass pillow block | 269 | kg |
| Cap bolt | 4 x 1-8 UNC | |||
| Cap bolt recommended tightening torque | 400 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Eye bolt | 2 x 1/2-13 UNC | |||
| Appropriate attachment bolt size | G | 1.5 | in | |
| Initial grease fill | 2749.95 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
