| da | 55 | mm | |
| db | 65.075 | mm | |
| dc | 52.375 | mm | |
| Da | 120 | mm | |
| Ca | 52.807 | mm | |
| A1 | 79.375 | mm | |
| A2 | 196.85 | mm | |
| S | 4.763 | mm | |
| ba | 36.513 | mm | |
| H | 157.162 | mm | |
| H1 | 82.55 | mm | |
| H2 | 30.163 | mm | |
| J | min. | 206.375 | mm |
| J | max. | 241.3 | mm |
| J1 | 50.8 | mm | |
| L | 279.4 | mm | |
| N1 | 15.875 | mm | |
| Threaded holes | |||
| R1 | 44.45 | mm | |
| R2 | 25.4 | mm | |
| RG | 1/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 36.513 | mm | |
| Housing | FSAF 311 | |||
| Bearing | 22311 E | |||
| ||||
| Lock nut | N 11 | |||
| Lock washer | W 11 | |||
| Stabilizing ring | SR-13-11 | |||
| Taconite seal (db shaft position) | TER 40 | |||
| Taconite seal (dc shaft position) | TER 27 | |||
| End plug (suffix Y) | EPR 6 | |||
| Max. speed for Taconite seal | 1200 | r/min |
| P60° | 35.6 | kN | |
| P90° | 21.4 | kN | |
| P120° | 13.3 | kN | |
| P150° | 12 | kN | |
| P180° | 14.2 | kN | |
| Pa | 8.9 | kN |
| Mass pillow block | 12.2 | kg |
| Cap bolt | 2 x 1/2-13 UNC | |||
| Cap bolt recommended tightening torque | 149.1 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.5 | in | |
| Initial grease fill | 68.04 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
