da | 85 | mm | |
db | 100.013 | mm | |
dc | 80.963 | mm | |
Da | 149.873 | mm | |
Ca | 45.796 | mm | |
A1 | 88.9 | mm | |
A2 | 127 | mm | |
ba | 31.75 | mm | |
H | 182.166 | mm | |
H1 | 95.25 | mm | |
H2 | 31.75 | mm | |
J | min. | 250.825 | mm |
J | max. | 279.4 | mm |
J1 | 53.975 | mm | |
L | 330.2 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 53.975 | mm | |
R2 | 22.225 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 36.513 | mm |
Housing | FSAF 217 | |||
Bearing | 1217 | |||
| ||||
Lock nut | AN 17 | |||
Lock washer | W 17 | |||
Stabilizing ring | 2 x SR-1517 | |||
Labyrinth ring (db shaft position) | LOR 89 | |||
Labyrinth ring (dc shaft position) | LOR 63 |
End plug (suffix Y) | EPR 13 |
Bearing limiting speed | 4000 | r/min |
P60° | 61.4 | kN | |
P90° | 36.9 | kN | |
P120° | 23.1 | kN | |
P150° | 20.9 | kN | |
P180° | 25.4 | kN | |
Pa | 16.5 | kN |
Mass pillow block | 15.9 | kg |
Cap bolt | 2 x 5/8-11 UNC | |||
Cap bolt recommended tightening torque | 149.1 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 218.29 | g |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ