| da | 49.212 | mm | |
| Da | 120 | mm | |
| Ca | 52.807 | mm | |
| A1 | 79.375 | mm | |
| A2 | 123.825 | mm | |
| ba | 29.369 | mm | |
| H | 157.162 | mm | |
| H1 | 82.55 | mm | |
| H2 | 30.163 | mm | |
| J | min. | 206.375 | mm |
| J | max. | 241.3 | mm |
| J1 | 50.8 | mm | |
| L | 279.4 | mm | |
| N1 | 15.875 | mm | |
| Threaded holes | |||
| R1 | 44.45 | mm | |
| R2 | 25.4 | mm | |
| RG | 1/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 38.1 | mm | |
| Housing | FSAF 611 | |||
| Bearing | 1311 EKTN9 | |||
| Adapter sleeve assembly | SNW 11x1.15/16 | |||
| Stabilizing ring | 2 x SR-1611 | |||
| Contact seal | 2 x B9784-19 | |||
| Ventilation fitting | 38174-12 | |||
| ||||
| End plug (suffix Y) | EPR 5 | |||
| Max. speed for contact seal | 2950 | r/min |
| P60° | 35.6 | kN | |
| P90° | 21.4 | kN | |
| P120° | 13.3 | kN | |
| P150° | 12 | kN | |
| P180° | 14.2 | kN | |
| Pa | 4.8 | kN |
| Mass pillow block | 12.4 | kg |
| Cap bolt | 2 x 1/2-13 UNC | |||
| Cap bolt recommended tightening torque | 149.1 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.5 | in | |
| Initial grease fill | 136.08 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
