| da | 73.025 | mm | |
| Da | 150 | mm | |
| Ca | 45.796 | mm | |
| A1 | 88.9 | mm | |
| A2 | 198.438 | mm | |
| ba | 31.75 | mm | |
| H | 182.166 | mm | |
| H1 | 95.25 | mm | |
| H2 | 31.75 | mm | |
| J | min. | 250.825 | mm |
| J | max. | 279.4 | mm |
| J1 | 53.975 | mm | |
| L | 330.2 | mm | |
| N1 | 19.05 | mm | |
| Threaded holes | |||
| R1 | 53.975 | mm | |
| R2 | 22.225 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 36.513 | mm | |
| Housing | FSAF 517 | |||
| Bearing | 1217 K | |||
| Adapter sleeve assembly | SNW 17x2.7/8 | |||
| Stabilizing ring | 2 x SR-1517 | |||
| Taconite seal | TER 52 | |||
| ||||
| End plug (suffix Y) | EPR 9 | |||
| Max. speed for Taconite seal | 1050 | r/min |
| P60° | 61.4 | kN | |
| P90° | 36.9 | kN | |
| P120° | 23.1 | kN | |
| P150° | 20.9 | kN | |
| P180° | 25.4 | kN | |
| Pa | 7.12 | kN |
| Mass pillow block | 16.5 | kg |
| Cap bolt | 2 x 5/8-11 UNC | |||
| Cap bolt recommended tightening torque | 149.1 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Appropriate attachment bolt size | G | 0.625 | in | |
| Initial grease fill | 218.29 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
